Hi Prof Jorge,
Submitted a hard copy of the following at the AGSB earlier today Aug 19, 2016:
1) Business Plan
2) NU 10
3) SR Ayurveda
Sending you Sir an e-copy of the NU 10
----------
Crisostomo S. Serrano, Jr.
Entrepreneurship
MBA-H AGSB
Prof. Jorge Saguinsin
May 28, 2016
NU10
1) Refrigerant type turbo Intercooler.
2) Water pressure tank air-water level maintainer
3) Drug testing on wheels.
4) Mandatory gps / gsm installation in all public utility vehicles.
5) Fluid level sensors
6) Thermostat controlled solar powered fans in the ceiling
7) MRT / LRT tandem trains
8) Iris recognition as a Biometric tool for access and security control
9) 24 hour study centers
10) Cellphone as an RFID device for access control
PRODUCT
1) Refrigerant type Turbo intercooler
PAIN ENCOUNTERED
The performance of turbo charged engines are not maximized in the tropical countries because of the inherently higher ambient temperatures.
CONCEPT OF THE INNOVATION
The trend in the automotive industry to increase the output or power of a motor is has shifted from increasing the displacement or size of the motor to pressurizing or boosting the air entering the engine thru turbocharging or supercharging. In this manner, smaller displacement engines which are fuel efficient can match the power output of bigger gas guzzling engines.
The main limitation in turbocharging applications is the heat generated when the air is compressed or pressurized by the turbo. It is a known fact that the hotter the air entering the combustion chamber, the less will be the expansion of the air- fuel mixture during the combustion process resulting to lesser force or power generated by the motor compared to cold air entering the engine.
The most common way of cooling the air after passing thru the turbo is thru the use of an air to air intercooler. This is an effective solution but is limited by the size and location of the intercooler as well as the ambient temperature. There must be a more effective and efficient way of addressing this issue.
The idea is to use a more effective way of lowering the air temperature entering the combustion chamber by using a refrigerant type of intercooler similar to the evaporator being used in our car air conditioners. It will use the same aircon compressor but will need additional plumbing of the refrigerant lines to allow a second aircon evaporator to cool the turbocharged air before entering the engine. This is similar to "dual-aircons" that we have in vans or larger SUV's.
ADVANTAGE OF THE INNOVATION
This innovation will dramatically lower the charged air entering the motor resulting to a more powerful combustion of the air-fuel mixture. This will make possible the use of smaller displacement motors producing the same output as a bigger traditionally intercooled motors.
This will also result to a smaller and lighter intercooler.
This is another concept that can improve the volumetric efficiency of motors and contribute to fuel efficiency.
IMPLEMENTATION OF THE INNOVATION – WHO
Automotive and air-conditioning engineers.
IMPLEMENTATION OF THE INNOVATION – HOW
Conceptualize the idea with the engineers
Research on possible design options
Prototyping
Working model
Testing on a commercial vehicle
Measure output on a dyno
Mass production for specific motors as an aftermarket kit
Mass production as an OEM for brand new production vehicles
PRODUCT
2) Water pressure tanks air-water level maintainer
PAIN ENCOUNTERED
Water pressure tanks usually suffer from water log. And you have to keep on regularly adding air in the tank or bladder of the tank to maintain the correct air-water level and prevent the pressure pump motor from running even of just a small amount of water is used. This frequent or premature running of the pump motor results to a higher electricity usage as the highest current usage of a motor is during the start up of the motor.
CONCEPT OF THE INNOVATION
A small air compressor similar to the portable air compressors we have for inflating tires can be built into the system to regularly infuse air into the tank to maintain the correct preset pressure of the air in the bladder in the tank.
ADVANTAGE OF THE INNOVATION
This will result to a more consistent air-water level and prevent water "log" from happening which results to decreased frequency of the pump motor running. This will reduce electricity consumption and prolong the life of the pump motor.
IMPLEMENTATION OF THE INNOVATION – WHO
Engineer
Fabricator
IMPLEMENTATION OF THE INNOVATION – HOW
Design concept
Research of ideal pump capacity and sensors
Prototyping
Testing
Mass production
PRODUCT
3) Drug testing on wheels
PAIN ENCOUNTERED
The drug menace
CONCEPT OF THE INNOVATION
Mandatory and random drug testing in all schools and offices will be conducted. A mobile drug testing facility in a van will be deployed to random offices and schools to conduct mandatory drug testing
ADVANTAGE OF THE INNOVATION
The employees / students will not be aware when the testing will be done. This a greater percentage of drug users will be identified. This concept will also make the testing more accessible to even remote areas.
IMPLEMENTATION OF THE INNOVATION – WHO
PDEA
DOLE
DOH
DepEd
Office of the President
IMPLEMENTATION OF THE INNOVATION – HOW
Proper laws will be enacted to be able to implement the system.
With the cooperation of the above mentioned government agencies, this project can easily be jump started.
PRODUCT
4) Mandatory gps / gsm installation in all public utility vehicles.
PAIN ENCOUNTERED
Reckless public utility vehicle drivers.
CONCEPT OF THE INNOVATION
A GPS device w GSM capabilities will be installed in all public utility vehicles. This device will have a seal similar to those of taxi meters to prevent removal or tampering. Alerts will be sent automatically to a monitoring center of the Highway patrol group and the LTO if the vehicle goes beyond a pre-set speed limit or if the vehicle goes out of their pre-determined approved routes or franchise.
Local telecom operators will assist the government in this program and will be given tax breaks or incentives for their cooperation and support.
ADVANTAGE OF THE INNOVATION
Public utility vehicles can be easily monitored and their respective drivers and operators fined and given appropriate sanctions or penalties of their vehicles are caught over speeding and going out of their approved routes.
IMPLEMENTATION OF THE INNOVATION – WHO
LTO
HPG
Telecom Companies
IMPLEMENTATION OF THE INNOVATION – HOW
Necessary laws will have to passed by the appropriate agencies.
Testing of commercially available devices
Installation of device during LTO renewal of registration pf said vehicles.
PRODUCT
5) Fluid level sensors
PAIN ENCOUNTERED
Low fluid levels in the vehicle can result to costly engine damage and or compromised safety. The warning systems in most vehicles will send a signal if the there is already a fault and the vehicle is already not safe to drive.
CONCEPT OF THE INNOVATION
The concept of this innovation is to install sensors of the different fluid levels in the vehicle to warn the driver to initiate corrective measures.
Example: a warning light will trigger when the coolant level in the reservoir is getting a bit low and NOT a temperature warning light alone that will trigger a warning only when the engine is already overheating.
ADVANTAGE OF THE INNOVATION
This will avoid costly engine failures and will minimize motorist inconvenience from vehicle breakdowns.
IMPLEMENTATION OF THE INNOVATION – WHO
Automotive engineers
IMPLEMENTATION OF THE INNOVATION – HOW
Research
Prototyping
Product testing
Mass production
PRODUCT
6) Thermostat controlled solar powered fans
PAIN ENCOUNTERED
Very hot indoor air because of the hot air accumulating in the attic or ceiling space.
This results to the air conditioning units working excessive and ofcouse a higher electricity consumption.
CONCEPT OF THE INNOVATION
Thermostat controlled solar powered fans in the ceiling / attic space of residential and commercial structures will automatically vent warm air out of the ceiling / attic space or the house when the temperature reaches a pre-set level to maintain a cooler indoor temperature.
ADVANTAGE OF THE INNOVATION
The resulting lower indoor temperature will result to less use of air conditioning and less electricity consumption.
IMPLEMENTATION OF THE INNOVATION – WHO
Design Engineers
Electrical engineers
Civil engineers
IMPLEMENTATION OF THE INNOVATION – HOW
Research
Prototyping
Testing
Mass production
PRODUCT
7) MRT / LRT Tandem Trains
PAIN ENCOUNTERED
Our MRT system has limited capacity resulting to very long lines. This has also discouraged the public from taking this form of transportation and instead just drive their own cars resulting to the the worsening of our traffic problems.
CONCEPT OF THE INNOVATION
We can increase the passenger carrying capacity of our MRT system by installing double the number of cars per Train.
There will be no need to increase the size of the station platforms. The train will initially stop at the platform and only the doors of the train cars in the front half will open. The doors on the train cars at remaining rear half that is still not positioned properly on the platform will remain closed. After 20 seconds, the front doors will close. The train will move slightly forward until the rear half of the train cars are positioned properly on the platform. Then the doors on the rear half of the train will open to load and unload passengers. This time, the doors on the cars in the front of the train will remain closed.
Upgrading of the trains power and brakes will also be in order to accommodate the additional load.
An upgrading of the signaling and communication systems will also be done.
ADVANTAGE OF THE INNOVATION
This is an easily implementable task. There will be no need to implement expensive structural changes in the MRT train platforms.
IMPLEMENTATION OF THE INNOVATION – WHO
LTFRB
MRT / LRT operators
IMPLEMENTATION OF THE INNOVATION – HOW
Consultation with the train manufacturers
Upgrading of the mechanical components of the trains to accommodate the higher load.
Upgrading of signaling, communication, safety and automation systems.
Public education and awareness
Implementation
PRODUCT
8) Iris recognition as a Biometric tool for access and security control
PAIN ENCOUNTERED
Lost or stolen ATM cards can lead to fraudulent transactions.
CONCEPT OF THE INNOVATION
Use of iris recognition technology for identification and access control in commonly used activities or transactions.
ADVANTAGE OF THE INNOVATION
There is a wide range of application for this technology.
Example are:
ATM machines – no need for ATM cards
Doors – no need for keys
Cars – no need for keys or keyfob. Integrate w push start sytem.
IMPLEMENTATION OF THE INNOVATION – WHO
Designers
Electrical engineers
IMPLEMENTATION OF THE INNOVATION – HOW
Consult w design and engineering team
Research
Coordination with the Bank, automotive industry etc where the application will be implemented
Prototyping
Testing
Mass production
PRODUCT
9) 24 hour study centers
PAIN ENCOUNTERED
There is a need for students to have a place to study at night.
Specific groups are those who stay in dorms and students who need a place to study that is not conducive for sleeping – ex bedroom :)
CONCEPT OF THE INNOVATION
Put up 24 hour study centers / coffee shops near universities.
ADVANTAGE OF THE INNOVATION
Students will have a conducive and safe place to study and be productive.
IMPLEMENTATION OF THE INNOVATION – WHO
Entrepreneurs
Architects
Contractors
Culinary school graduates
IMPLEMENTATION OF THE INNOVATION – HOW
Exploration of Concept
Formation of core group - investors
Research on ideal location
Research and Testing of food to serve
Construction of facility
Opening of facility
PRODUCT
10) Cellphone as an RFID device for access control
PAIN ENCOUNTERED
The need to stop at tollways to pay. The long traffic lines. The need for exact change
CONCEPT OF THE INNOVATION
The use of a cellphone as an RFID device for access control such as for toll gates etc is easily doable.
ADVANTAGE OF THE INNOVATION
Everybody has a cellphone. This can easily be activated to perform the necessary access needed. Payments can also easily be integrated in the monthly bills or also as a prepaid method.
IMPLEMENTATION OF THE INNOVATION – WHO
Telecom companies
Tollway operators
Cellphone manufacturers
Cellphone Aps maker
IMPLEMENTATION OF THE INNOVATION – HOW
Meeting of the above mentioned groups
Developing of system
Developing of aps
Testing
Public awareness
Implementation
4
No comments:
Post a Comment